Waterproof headphone socket
2020年7月17日Waterproof headphone socket, high quality waterproof headphone socket, waterproof headphone socket manufacturer
Product size: 6.35 headphone jack 35.513.411.0mm
Product performance: 6.35 three-pole headphone jack
Product Brand: GSwitch
Product Technical Index:
Operating temperature range: 2070; withstand voltage: AC250V (50Hz)/min
Rated load: DC 30V 0.5A; action force: 320N
Contact resistance: 0.05; life; 5000 times
Insulation resistance: 100M
Mainly used in mobile phone stereo design, CD player, wireless phone, MP3 player, digital notebook computer, DVD,
Digital cameras are mainly used in mobile phone stereo design, CD players, wireless phones, MP3 players, digital laptops, DVDs, and digital cameras.
The main components of the headphone socket:
It is composed of: plastic base, phosphor copper terminal, beryllium copper terminal.
GSwitch Dongguan Pinzan Electronic Technology Co., Ltd.
GSwitch Dongguan Pinzan Electronic Technology Co., Ltd.
SPECIFICATION
Specifications
Designation Name:
6.35 PHONE JACK
Model No.:
PJ601A
1. Rating:
DC 30V 0.5A
2. Operation temperature range:
20+70
3. Preservative temperature range Preservative temperature range:
?
?
?
?
?
?
4. Construction dimension
structure size:
Apply to the appended drawing:
Compliant with additional drawings
Item
Test condition
Specification
5. Electrical characteristics
5A
Contact Resistance
Contact impedance
Being measured at 1KHz small current
contact esistance meter.
Measured at 1KHZ small current.
30m max.
Below 30 milliohms.
5B
Insulation Resistance
Insulation resistance
Measurements shall be made following
?application of DC
?250V potential across terminals and across
?terminals and frame for 1 minute.
Add DC 250V between the terminals and between the terminals and the case,
Measure for 1 minute.
100M min.
100 megohms or more.
5C
Withstand Voltage
Withstand voltage
AC 500V (50Hz or 60Hz) shall be applied
across terminals and across terminals
and frame for one minute.
Add AC 500V between the terminals and between the terminals and the case
Under the condition of (50HZ or 60HZ), the measurement lasts for 1 minute.
There shall be no breakdown.
No breakdown occurs.
6. Mechanical characteristics
6A
Insertion and
?Extraction force
Insertion force
Being measure at across spring piece
and across matching plug for ergometer.
Use a dynamometer to measure between the plug and the shrapnel.
Insertion and extraction force: 325N
Insertion force: 325N
6B
Terminal Strength
Terminal strength
A static force of 5N being applied in
one direction on the tip of terminal
for 10sec.
Apply a static load of 5N to the top of the terminal
The direction lasts 10 seconds.
(1). Contact resistance: 30mmax.
Contact impedance: below 30 milliohms.
(2). Insertion and withdraw force: 325N
Insertion force and extraction force: 325N
(3). Electrical characteristics and
mechanical characteristics shall
?be satisfied.
Without distinct damage.
The mechanical and electrical properties meet the specified requirements, and no abnormality occurs
7. Durability
7A
Soldering test
Solderability test
The tip of the terminals shall be dipped
2mm in the solder bath at a temperature
of2405 for 30.5sec.
The top of the terminal is immersed into the solder pool 2mm deep, the temperature
2405, time 30.5 seconds.
A new uniform coating of solder
shall cover a minimum of 95%
of the surface being immersed.
More than 95% of the power receptacle manufacturer immersed surface will be covered by tin.
7B
Resistance to
soldering heat
Resistance to welding heat
The jack shall be put into at the temperature
of 2505 in 51sec(Automatic soldering)
or 3805 in 31sec(Manual soldering)
?after which measurement shall be made.
Immerse the product terminals in the tin furnace, 2505, 51 seconds
(Automatic welding);
3805, 31 seconds (manual welding)
(1). Contact resistance: 30mmax.
Contact impedance: below 30 milliohms.
(2). Insertion and withdraw force: 325N
Insertion force and extraction force: 325N
(3). Electrical characteristics and
mechanical characteristics shall
be satisfied.
Without distinct damage.
The mechanical and electrical properties meet the specified requirements,
No abnormality
Remark
Remarks
GSwitch Dongguan Pinzan Electronic Technology Co., Ltd.picture
Designation Name:
6.35 PHONE JACK
Model No.:
PJ601A
Item
Test condition
Specification
7C
Life test
Life test
5,000 cycles of operation at a rate of 2030
cycles per minute with unloading.
?
Under no-load conditions, 5,000 operations per minute at a speed of 2030.
(1). Contact resistance: 30mmax.
Contact impedance: below 30 milliohms.
(2). Insertion and withdraw force: 325N
Insertion force and extraction force: 325N
(3). Electrical characteristics and
mechanical characteristics shall be satisfied.
?Without distinct damage.
The mechanical and electrical properties meet the specified requirements, and no abnormality occurs
7D
Heat test
Heat resistance test
At 852 for 96 hours, after test keep in
?normal condition for 30 minutes.
96 hours in 852 environment, then visit here put
Test after 30 minutes in a normal environment.
(1). Contact resistance: 30mmax.
Contact resistance: below 30 milliohms
(2). Insulation resistance: 100Mmin.
Insulation resistance: 100 megohms or more
(3). There shall be no sign of damage
?mechanically and electrically.
There is no sign of damage to mechanical and electrical performance.
7E
Humidity test.
Humidity test
The condition of temperature 402
and humidity 90 95% for 96 hours,
after test keep in normal condition
for 30 minutes.
96 hours in an environment of temperature 402 and humidity 9095%,
Put it in a normal environment for 30 minutes before testing.
7F
Cold test
Cold resistance test
At 402 for 96 hours, after test keep
in normal condition for 30 minutes.
Place in 402 environment for 96 hours, then put
Test after 30 minutes in a normal environment.
7G
Salt spray test
Spray test
At 5% Nacl liquor for 24 hours, after washing,
keep in normal condition for 30 minutes.
Spray in 5% Nacl solution for 24 hours, wash with water and apply
Leave at room temperature for 30 minutes.
Without excessive Corrosion or crack
in appearance
No obvious corrosion on the surface or peeling of the coating
8. Standard condition test and measurement status
?
Unless otherwise specified, the test and measurements shall be carried out as follows:
Ambient temperature: 535
Relative humidity: 4585%
Air pressure: 86106kPa(8601060mbar)
However if doubt arises on the decision based on the measured values
?under the abovementioned conditions,
the following condition
shall be employed: However, when in doubt about the judgment, it shall be implemented as follows:
Ambient temperature: 202
Relative humidity: 655%
Air pressure: 86106kPa(8601060mbar)
?
Remark
Remarks
GSwitch Dongguan Pinzan Electronic Technology Co., Ltd.
Product size: 6.35 headphone jack 35.513.411.0mm
Product performance: 6.35 three-pole headphone jack
Product Brand: GSwitch
Product Technical Index:
Operating temperature range: 2070; withstand voltage: AC250V (50Hz)/min
Rated load: DC 30V 0.5A; action force: 320N
Contact resistance: 0.05; life; 5000 times
Insulation resistance: 100M
Mainly used in mobile phone stereo design, CD player, wireless phone, MP3 player, digital notebook computer, DVD,
Digital cameras are mainly used in mobile phone stereo design, CD players, wireless phones, MP3 players, digital laptops, DVDs, and digital cameras.
The main components of the headphone socket:
It is composed of: plastic base, phosphor copper terminal, beryllium copper terminal.
GSwitch Dongguan Pinzan Electronic Technology Co., Ltd.
GSwitch Dongguan Pinzan Electronic Technology Co., Ltd.
SPECIFICATION
Specifications
Designation Name:
6.35 PHONE JACK
Model No.:
PJ601A
1. Rating:
DC 30V 0.5A
2. Operation temperature range:
20+70
3. Preservative temperature range Preservative temperature range:
?
?
?
?
?
?
4. Construction dimension
structure size:
Apply to the appended drawing:
Compliant with additional drawings
Item
Test condition
Specification
5. Electrical characteristics
5A
Contact Resistance
Contact impedance
Being measured at 1KHz small current
contact esistance meter.
Measured at 1KHZ small current.
30m max.
Below 30 milliohms.
5B
Insulation Resistance
Insulation resistance
Measurements shall be made following
?application of DC
?250V potential across terminals and across
?terminals and frame for 1 minute.
Add DC 250V between the terminals and between the terminals and the case,
Measure for 1 minute.
100M min.
100 megohms or more.
5C
Withstand Voltage
Withstand voltage
AC 500V (50Hz or 60Hz) shall be applied
across terminals and across terminals
and frame for one minute.
Add AC 500V between the terminals and between the terminals and the case
Under the condition of (50HZ or 60HZ), the measurement lasts for 1 minute.
There shall be no breakdown.
No breakdown occurs.
6. Mechanical characteristics
6A
Insertion and
?Extraction force
Insertion force
Being measure at across spring piece
and across matching plug for ergometer.
Use a dynamometer to measure between the plug and the shrapnel.
Insertion and extraction force: 325N
Insertion force: 325N
6B
Terminal Strength
Terminal strength
A static force of 5N being applied in
one direction on the tip of terminal
for 10sec.
Apply a static load of 5N to the top of the terminal
The direction lasts 10 seconds.
(1). Contact resistance: 30mmax.
Contact impedance: below 30 milliohms.
(2). Insertion and withdraw force: 325N
Insertion force and extraction force: 325N
(3). Electrical characteristics and
mechanical characteristics shall
?be satisfied.
Without distinct damage.
The mechanical and electrical properties meet the specified requirements, and no abnormality occurs
7. Durability
7A
Soldering test
Solderability test
The tip of the terminals shall be dipped
2mm in the solder bath at a temperature
of2405 for 30.5sec.
The top of the terminal is immersed into the solder pool 2mm deep, the temperature
2405, time 30.5 seconds.
A new uniform coating of solder
shall cover a minimum of 95%
of the surface being immersed.
More than 95% of the power receptacle manufacturer immersed surface will be covered by tin.
7B
Resistance to
soldering heat
Resistance to welding heat
The jack shall be put into at the temperature
of 2505 in 51sec(Automatic soldering)
or 3805 in 31sec(Manual soldering)
?after which measurement shall be made.
Immerse the product terminals in the tin furnace, 2505, 51 seconds
(Automatic welding);
3805, 31 seconds (manual welding)
(1). Contact resistance: 30mmax.
Contact impedance: below 30 milliohms.
(2). Insertion and withdraw force: 325N
Insertion force and extraction force: 325N
(3). Electrical characteristics and
mechanical characteristics shall
be satisfied.
Without distinct damage.
The mechanical and electrical properties meet the specified requirements,
No abnormality
Remark
Remarks
GSwitch Dongguan Pinzan Electronic Technology Co., Ltd.picture
Designation Name:
6.35 PHONE JACK
Model No.:
PJ601A
Item
Test condition
Specification
7C
Life test
Life test
5,000 cycles of operation at a rate of 2030
cycles per minute with unloading.
?
Under no-load conditions, 5,000 operations per minute at a speed of 2030.
(1). Contact resistance: 30mmax.
Contact impedance: below 30 milliohms.
(2). Insertion and withdraw force: 325N
Insertion force and extraction force: 325N
(3). Electrical characteristics and
mechanical characteristics shall be satisfied.
?Without distinct damage.
The mechanical and electrical properties meet the specified requirements, and no abnormality occurs
7D
Heat test
Heat resistance test
At 852 for 96 hours, after test keep in
?normal condition for 30 minutes.
96 hours in 852 environment, then visit here put
Test after 30 minutes in a normal environment.
(1). Contact resistance: 30mmax.
Contact resistance: below 30 milliohms
(2). Insulation resistance: 100Mmin.
Insulation resistance: 100 megohms or more
(3). There shall be no sign of damage
?mechanically and electrically.
There is no sign of damage to mechanical and electrical performance.
7E
Humidity test.
Humidity test
The condition of temperature 402
and humidity 90 95% for 96 hours,
after test keep in normal condition
for 30 minutes.
96 hours in an environment of temperature 402 and humidity 9095%,
Put it in a normal environment for 30 minutes before testing.
7F
Cold test
Cold resistance test
At 402 for 96 hours, after test keep
in normal condition for 30 minutes.
Place in 402 environment for 96 hours, then put
Test after 30 minutes in a normal environment.
7G
Salt spray test
Spray test
At 5% Nacl liquor for 24 hours, after washing,
keep in normal condition for 30 minutes.
Spray in 5% Nacl solution for 24 hours, wash with water and apply
Leave at room temperature for 30 minutes.
Without excessive Corrosion or crack
in appearance
No obvious corrosion on the surface or peeling of the coating
8. Standard condition test and measurement status
?
Unless otherwise specified, the test and measurements shall be carried out as follows:
Ambient temperature: 535
Relative humidity: 4585%
Air pressure: 86106kPa(8601060mbar)
However if doubt arises on the decision based on the measured values
?under the abovementioned conditions,
the following condition
shall be employed: However, when in doubt about the judgment, it shall be implemented as follows:
Ambient temperature: 202
Relative humidity: 655%
Air pressure: 86106kPa(8601060mbar)
?
Remark
Remarks
GSwitch Dongguan Pinzan Electronic Technology Co., Ltd.
コメント